캐리어테이프 포밍머신 (CARRIER TAPE FORMING MACHINE)

Model number: SHT-W88ST96

SMT용 전자부품 및 반도체용 캐리어 테이프 생산장비로서 88mm, 72mm, 64mm, 56mm폭의 한 줄 생산 및 12mm, 16mm 4열, 24mm 3열, 32mm, 44mm 2열 생산이 가능하며, 시간당 최대 1,600미터의 캐리어테이프를 제조할 수 있는 장비

Production Speed :   70shots / minute

Width of Tape      :    88mm / maximum

Pocket Depth      :    12mm / maximum

Control System   :     PLC Control (Programmable control) & Touch Panel

Base Material    :     PS, PVC, PC, PET with Conductive & Non-conductive

Productione row  :   Multi row （maximum speed)

                             8mm x 4rows        96mm x 70shots x 60minutes x 4lines= 1,612meters/hour

                                                       (** Only Male type mould is applicable for 8mm)

                             12mm×4rows        96mm×70shots×60minutes×4lines = 1,612meters/hour

                             16mm×4rows         96mm×70shots×60minutes×4lines = 1,612meters/hour

                             24mm×3rows         96mm×70shots×60minutes×3lines = 1,209meters/hour

                             32mm×2rows         96mm×70shots×60minutes×2lines = 806meters/hour

                             44mm×2rows         96mm×70shots×60minutes×2lines = 806meters/hour

                             56mm, 64mm, 72mm, 88mm x single row = each 403meters/hour

Un-winder Section:  Geared brake motor 90W, AC 220V, Three phase, 50Hz

                              Inside diameter ¢76mm(3inch bobbin)

                              Outside diameter¢750mm

Heating Section:       Two-steps heating

                              Pre heating

                              Forming heating

                              Cartridge heater 300W*8ea, AC 220V, Single phase

Forming Section   :   Compatible  female and male type Mould

Punching Section:   Servo motor driven punching system

Feeding Drive Unit:  Servo motor driven standard feeding 96mm

Cooling System :     Water Circulation, Water Pump Motor 230W, AC 220V

                             Three phase, Water Tank 5liters

                             Refrigerator to be integrated inside

Slitting section  :     Rotary cutter

Winding section  :   Inside diameter ¢13 & ¢76mm

                            Outside diameterup to ¢680mm (Gear motor 40W)

Installation Area   : 2000mm(L)*1600mm(H)*850m(W)

                            Machine Weight 700kg

                            Air supply 5~7bar

                            Power supply AC 220V, Three phase, 50Hz

Option  :                Piercing punching, Traverse winding machine, Vision system

                                      홈       ㅣ       제품소개    ㅣ        회사소식  ㅣ        회사소개   ㅣ      연 락 처  ㅣ

주 소: 서울 금천구 가산동 60-4 코오롱테크노밸리 108호 (Zip: 153-770)              Tel: 82-2-854-2572                 Fax: 82-2-854-2573

 Email: sht@seonghan.com               sht@seonghan.co.kr                               Website: www.seonghan.com         www.seonghan.co.kr